Please make sure you physically measure your Plasma including stands, clamps, brackets, and compare to the inside dimensions of this case before purchasing. These large cases are very expensive to ship and returns are cost prohibitive. Do not use internet or owners manual dimensions because they are often incorrect. Pay special attention to the length and height of the case. The width or depth of the case is not as important because the case is wide enough to hold multiple plasmas. To calculate how many screens can fit into this case, measure your tvs from front to back including any brackets, clamps, stands, that may be attached. This case has a total of 11 inches of depth from foam to foam less 1 inch for thickness of the divider. This leaves approx 10″ of usable space for your tvs. The case is constructed of 1/4 inch plywood with a heavy vinyl nubtex laminate. Aluminum bindings are permanently machine split riveted throughout then finished with high quality spring loaded recessed catches and handles. The movable divider is made of double wall corrugated board folded over and laminated to 1/4 inch polyethylene foam on both sides. The movable divider is an easy solution for dividing and carrying multiple screens in one case. Two 2 foam strips are supplied for making stand-off foam rails for brackets or clamps attached to your tvs. If your TV has brackets or clamps attached, simply cut and layer foam strips and glue two foam rails to one side of divider. This will form an enclosure for the brackets or clamps preventing them from hitting against the case wall. Make sure the foam rails are a little deeper than protrusion (See Thumbnail Photo). The case also includes 3 inch heavy duty swivel casters mounted on a full length wheel board for strength. This case is 1/4 light to medium duty construction and not recommended for shipping.
ID From Foam To Foam Are: 55 W x 11 D (Approx 10 inches Useable Depth w/Dividers Inserted) x 34 High
All Recessed Hardware – Steel Flat Corners – 3 inch Casters (Require Installation)
Outside Dimensions Of Case Closed Approx: 57 W x 12 D x 40 High (With Wheels)
1/4 Poly Foam Lined Interior – One (1) Moveable Divider to Separate Screens – Divider Approx 1 inch Thick
1/4 Ply ATA Construction – Heavy Vinyl Nubtex Laminate – All Aluminum Riveted Bindings
